Back


ELECTROCOLOURING SUPPLIERS MOD. EL. CO. TECH GS3

The advantages of this generation of static machine used for the aluminium electrocolouring are remarkable and mainly for the following reasons:
EL. CO. TECH. GS3
  • Three - Phase
    Power net supply perfectly balanced
  • Static machine
    Not - scheduled maintenance
  • Wave shape with variable figure
    Different and changeable wave shapes can be presetted according to the kind of treatment
 CONVENTIONAL BRUSHING SUPPLIERS
  • Two - Phase power supply
    Power net supply strongly unbalanced
  • Machine with some motorized brushing parts in motion
    Periodical maintenance
  • Wave shape sinusoidal
    The wave shape is normally sinusoidal or, in some cases only partialized


EXAMPLE OF PERFORMANCES COMPARISON

EL. CO. TECH GS3 SUPPLIER CONVENTIONAL BRUSHING SUPPLIER
For charges of 110 m2 OUTPUT 4.000 A 30 VOLT OUTPUT 12.000 A 25 VOLT
For charges of 80 m2 OUTPUT 3.000 A 30 VOLT OUTPUT 8.000 A 25 VOLT
For charges of 55 m2 OUTPUT 2.000 A 30 VOLT OUTPUT 6.000 A 25 VOLT

TREATMENT TIME at least 30% less than a conventional machine (it depends on the cycle required)

COLOUR PRESETTER
By means of COLOUR CAD 2000 MICROPROCESSOR, the colour code required can be plan automatically